VaporBlock® Series (VB10VB15)

Types:

VaporBlock® is a high-performance, under-slab vapor barrier designed to retard moisture migration through concrete slabs and walls to protect your structures from mold, mildews and fungi. It also protects flooring from increased moisture levels and is used as a component of radon mitigation systems to protect indoor air quality and occupant health.

VaporBlock® is manufactured to strict conformance specifications under our ISO 9001 Certified Management System to consistently exceed ASTM standards and project expectations.

Benefits

  • Ultra-low moisture vapor permeability
  • Superior puncture resistance
  • Resistance to decay and degradation

Resources

Related Accessories

See All
Vapor Bond Tape (TVB4)

Vapor Bond Tape (TVB4)

This white single-sided tape combines a heavy duty, weather-resistant polyethylene backing with an aggressive rubber adhesive. VaporBond Tape offers excellent seaming capabilities for our materials with an "Easy Tear" feature to reduce installation time. TVB4 has a WVTR of 0.18 perms per ASTM D 833. Typical applications include vapor retarders, covers and liners. Available in a 4" x 210' roll.
R25B Tape (R25B)

R25B Tape (R25B)

R25B Tape is a single sided aggressive synthetic elastomeric adhesive that bonds instantly to properly prepared polyethylene and polypropylene. The black polymer backing and adhesive is specially formulated to provide years of performance even in direct sunlight. A poly release liner provides for ease of installation. Available in a 4" x 100' roll.
VaporSeal™ Tape (TVSP4/TVSP12)

VaporSeal™ Tape (TVSP4/TVSP12)

VaporSeal™ Tape is a patented single-sided 7-layer gas barrier tape with a release liner for ease of installation. The backing contains a layer of highly impermeable EVOH designed to block migration of radon, methane and VOC's. An aggressive acrylic adhesive provides outstanding adhesion to polyethylene over a wide temperature range. Typical uses include joining, repairing and sealing gas/moisture barriers. Available in 4" x 160' and 12" x 50' rolls.
Butyl Seal Tape (TP2BR/TP6BR)

Butyl Seal Tape (TP2BR/TP6BR)

Butyl seal is a double-sided aggressive reinforced black butyl rubber tape used to join panels of polyethylene and polypropylene together by overlapping the edges and applying Butyl Seal in between. It is also used to adhere to concrete walls and footings when properly prepared. Butyl Seal is non-hardening and flexible. Available in 2" x 50' and 6" x 50' rolls.
VaporBoot Tape (TBOOT)

VaporBoot Tape (TBOOT)

VaporBoot Tape is a single-sided elastomeric butyl tape used to complete pipe boot installations (sealing the boot to the pipe). The 100% stretchable Butyl adhesive features excellent adhesion values and 3-D stretching that can be easily molded to multiple surfaces without any creases and folds. Available in 2" x 16.4' roll.
POUR-N-SEAL™ (PNS1G)

POUR-N-SEAL™ (PNS1G)

POUR-N-SEAL™ is a gray two part medium viscosity high strength epoxy used to seal around multiple pipe penetrations in tight areas where pipe boots are not practical, when installing VaporBlock moisture and gas barriers. (Adhesive backed 1" weather stripping foam required—sold separately).
VaporBoot System (VBOOT, TBOOT, TVB4)

VaporBoot System (VBOOT, TBOOT, TVB4)

The VaporBoot System is designed to assist in securing pipe and other penetrations that run vertically through the vapor retarder material. The VaporBoot System, made from our high performance VaporBlock® material, offers a quick solution and is delivered to the jobsite. The complete package includes 25 VaporBoots 18”x18” (with a precut center marker), 1 Roll VaporBoot (TBOOT) Tape 2”x16.4”, and 1 roll of Vapor Bond Tape (TVB4) 4”x210’.
VaporBoot Plus Preformed Pipe Boots (VBPBT)

VaporBoot Plus Preformed Pipe Boots (VBPBT)

VaporBoot Plus Preformed Pipe Boots are produced from heavy 40 mil co-extruded polyethylene and barrier resins for excellent strength and durability. The preformed boots are stepped to fit 1" to 4" wide pipe penetrations. VaporBoot Plus Preformed Pipe Boots are available in quantities of 12 per box.
Dura-Clips (CLIP11)

Dura-Clips (CLIP11)

These full size clips are 11" long and fit most commercial scaffolding. Dura-Clips will securely fasten your poly sheeting to scaffolding, reducing wind whip and increasing the life of your enclosure. Clips are normally placed about every 3' onto the enclosure.
Tie-Down Buttons (BUTI) & Tarp Grabbers (BUTEZ)

Tie-Down Buttons (BUTI) & Tarp Grabbers (BUTEZ)

Tie-Down Buttons & Tarp Grabbers help keep plastic sheeting securely in place. Tie-Down Buttons are designed to eliminate traditional grommets in plastic sheeting up to 10 mil thick and are reusable plastic fittings that are easy to install in any position. Tarp Grabbers are up to 4 times stronger than a brass grommet and are typically used in heavier plastic sheeting from 10 mil to 30 mil thick. Great for equipment covers, large storage covers and truck tarps.

Related Products

See All

Dura-Skrim® NHD-Series

Polyester scrim reinforced geomembrane consisting of flexible and conforming linear low-density polyethylene and chemically resistant high-density outer layer. Offers an optimal balance of resistance to environmental stress cracks, aqueous chemicals, and solvents, and high tensile and puncture strength.
View Product

Dura-Skrim® R-Series

Colorless, diagonal polyester scrim reinforced extrusion laminate. The outer layers consist of a clear, high-strength linear low-density polyethylene (LLDPE). The individual plies of heavy duty scrim are laminated together with molten polyethylene to create a clear, four-layer reinforced laminate.
View Product

HydraFlex® H-Series

Economy grade linear low-density polyethylene (LLDPE) with an inner core of virgin and selected reprocessed resins. The geomembranes are stabilized with carbon black and antioxidants designed for an economical solution. Offers exceptional value with ease of welding and high impact and tear resistance.
View Product

RUFCO® Series

Three-layer cross-laminated high-density polyethylene film with high strength-to-weight ratios. Two types of films, one best for outdoor longevity with carbon black and UV stabilizers, and the other with additional strength for optimum puncture and tear resistance. Both are resistant to degradation.
View Product

SoilSeal™ Series

Colorless multi-layer linear low-density polyethylene (LLDPE) fumigation and broadcast film. The multi-layer configuration provides exceptional tear and impact strength, ease of installation and removal, flexibility on uneven surfaces, and long-term field performance with thermal and UV stabilizers.
View Product

VaporBlock Plus® Series

White and gold seven-layer underslab and vertical wall vapor and gas barrier made of polyethylene and an EVOH core for unmatched impact strength and superior resistance to gas and moisture transmission. More than 100 times less permeable than typical high-performance polyethylene vapor retarders.
View Product